Brennenstuhl 1298680 Moisture Detector MD

Price: £19.85 £14.00
Product prices and availability are accurate as of 2017-09-22 18:51:56 UTC and are subject to change. Any price and availability information displayed on http://www.amazon.co.uk/ at the time of purchase will apply to the purchase of this product.
You Save: £5.85 (29%)
Availability: In Stock
Usually dispatched within 24 hours
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

Brennenstuhl moisture detector MD

The device with robust and handy case seeks to determine moisture content of wood or building materials like concrete, brick, floor, plaster board, wallpaper, etc.
The measuring range is 5-50% for wood or 1, 5-33% for building materials. The result is displayed on a large LCD display
(in percent, resolution 0.1%) as well as audible beep (can be switched off).

There is a practical "hold" function which allows the measurement even in poorly accessible places. An automatic shut-off about 3 minutes
after last use, as well as a lower battery voltage indicator is also included. Holdings is the device with a commercially available 9V battery (not included).

Data sheet
Manufacturer: Brennenstuhl
Manufacturer no.: 1298680
Title: Moisture detector / damp detector MD.
Measuring range: 5-50% for wood or 1, 5 to 33% in construction materials
Dimensions: approx. 15 x 6.6 x 3 cm
Weight: 200 g
Colour: dark grey / orange

Product Features

Moisture Detector MD To determine the moisture content of wood or building material, such as, e g concrete, brick, screed, plasterboard, wallpaper, etc Measurement range of 5 - 50 % for wood, or 1 5 - 33 % for building material Display on a large LCD display (in percent, resolution 0 1 %) as well as acoustically (can be deactivated) Practical "hold" function also makes measurement possible at locations difficult to access Automatic switch-off approx 3 mins, after last application Battery low voltage display Robust, ergonomic housing with separate compartment for 9 V monobloc battery (not included) With protective cap In blister packaging

Write a Review